curl https://exampleconfig.com/api/v1/config/original/a3c7629e7a55080e9c2f4ff1c70a98b2?hint=proxy.conf
wget -O proxy.conf https://exampleconfig.com/api/v1/config/original/a3c7629e7a55080e9c2f4ff1c70a98b2?hint=proxy.conf
# If you want to use apache2 as a forward proxy, uncomment the # 'ProxyRequests On' line and the <Proxy *> block below. # WARNING: Be careful to restrict access inside the <Proxy *> block. # Open proxy servers are dangerous both to your network and to the # Internet at large. # # If you only want to use apache2 as a reverse proxy/gateway in # front of some web application server, you DON'T need # 'ProxyRequests On'. #ProxyRequests On #<Proxy *> # AddDefaultCharset off # Require all denied # #Require local #</Proxy> # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block #ProxyVia Off
sudo apk add apache2
sudo apt update && sudo apt install apache2
sudo yum install httpd
sudo apt update && sudo apt install apache2
Use this original configuration file when you need to restore Apache HTTP Server to its default state after misconfiguration, during fresh installations, or as a baseline for customization. It's particularly useful for troubleshooting when your current config isn't working properly.
Download this file and replace your current configuration at /etc/apache2/mods-available/proxy.conf
. Make sure to backup your existing configuration first, then restart the Apache HTTP Server service to apply the changes.
This is the factory-default configuration that ships with Apache HTTP Server on Ubuntu 24.04 LTS (Noble Numbat). While it provides a secure baseline, you should review and customize security settings based on your specific production requirements and compliance needs.
This configuration is specifically from Ubuntu 24.04 LTS (Noble Numbat). Different operating systems and versions may have slightly different default settings, security patches, or feature availability. Check the compatibility section above for other OS versions.
Yes, this original configuration is excellent for troubleshooting. Compare it with your current settings to identify modifications that might be causing issues, or temporarily replace your config with this one to isolate problems.